first commit

.gitignore

@@ -0,0 +1,5 @@
+.pio
+.vscode/.browse.c_cpp.db*
+.vscode/c_cpp_properties.json
+.vscode/launch.json
+.vscode/ipch

.vscode/extensions.json

@@ -0,0 +1,10 @@
+{
+    // See http://go.microsoft.com/fwlink/?LinkId=827846
+    // for the documentation about the extensions.json format
+    "recommendations": [
+        "platformio.platformio-ide"
+    ],
+    "unwantedRecommendations": [
+        "ms-vscode.cpptools-extension-pack"
+    ]
+}

include/README

@@ -0,0 +1,39 @@
+
+This directory is intended for project header files.
+
+A header file is a file containing C declarations and macro definitions
+to be shared between several project source files. You request the use of a
+header file in your project source file (C, C++, etc) located in `src` folder
+by including it, with the C preprocessing directive `#include'.
+
+```src/main.c
+
+#include "header.h"
+
+int main (void)
+{
+ ...
+}
+```
+
+Including a header file produces the same results as copying the header file
+into each source file that needs it. Such copying would be time-consuming
+and error-prone. With a header file, the related declarations appear
+in only one place. If they need to be changed, they can be changed in one
+place, and programs that include the header file will automatically use the
+new version when next recompiled. The header file eliminates the labor of
+finding and changing all the copies as well as the risk that a failure to
+find one copy will result in inconsistencies within a program.
+
+In C, the usual convention is to give header files names that end with `.h'.
+It is most portable to use only letters, digits, dashes, and underscores in
+header file names, and at most one dot.
+
+Read more about using header files in official GCC documentation:
+
+* Include Syntax
+* Include Operation
+* Once-Only Headers
+* Computed Includes
+
+https://gcc.gnu.org/onlinedocs/cpp/Header-Files.html

lib/README

@@ -0,0 +1,46 @@
+
+This directory is intended for project specific (private) libraries.
+PlatformIO will compile them to static libraries and link into executable file.
+
+The source code of each library should be placed in a an own separate directory
+("lib/your_library_name/[here are source files]").
+
+For example, see a structure of the following two libraries `Foo` and `Bar`:
+
+|--lib
+|  |
+|  |--Bar
+|  |  |--docs
+|  |  |--examples
+|  |  |--src
+|  |     |- Bar.c
+|  |     |- Bar.h
+|  |  |- library.json (optional, custom build options, etc) https://docs.platformio.org/page/librarymanager/config.html
+|  |
+|  |--Foo
+|  |  |- Foo.c
+|  |  |- Foo.h
+|  |
+|  |- README --> THIS FILE
+|
+|- platformio.ini
+|--src
+   |- main.c
+
+and a contents of `src/main.c`:
+```
+#include <Foo.h>
+#include <Bar.h>
+
+int main (void)
+{
+  ...
+}
+
+```
+
+PlatformIO Library Dependency Finder will find automatically dependent
+libraries scanning project source files.
+
+More information about PlatformIO Library Dependency Finder
+- https://docs.platformio.org/page/librarymanager/ldf.html

platformio.ini

@@ -0,0 +1,20 @@
+; PlatformIO Project Configuration File
+;
+;   Build options: build flags, source filter
+;   Upload options: custom upload port, speed and extra flags
+;   Library options: dependencies, extra library storages
+;   Advanced options: extra scripting
+;
+; Please visit documentation for the other options and examples
+; https://docs.platformio.org/page/projectconf.html
+
+[env:d1_mini]
+platform = espressif8266
+board = d1_mini
+framework = arduino
+lib_deps =
+  # RECOMMENDED
+  # Accept new functionality in a backwards compatible manner and patches
+  adafruit/Adafruit INA219 @ ^1.2.0
+  
+monitor_speed = 115200

src/main.cpp

@@ -0,0 +1,113 @@
+#include <Arduino.h>
+
+/* 
+* i2c_port_address_scanner
+* Scans ports D0 to D7 on an ESP8266 and searches for I2C device. based on the original code
+* available on Arduino.cc and later improved by user Krodal and Nick Gammon (www.gammon.com.au/forum/?id=10896)
+* D8 throws exceptions thus it has been left out
+*
+*/
+
+#include <Wire.h>
+#include <Adafruit_INA219.h>
+
+Adafruit_INA219 ina219;
+
+void setup() {
+  Serial.begin(115200);
+  while (!Serial);             // Leonardo: wait for serial monitor
+  Serial.println("\n\nI2C Scanner to scan for devices on each port pair D0 to D7");
+
+// Initialize the INA219.
+  // By default the initialization will use the largest range (32V, 2A).  However
+  // you can call a setCalibration function to change this range (see comments).
+  if (! ina219.begin()) {
+    Serial.println("Failed to find INA219 chip");
+    while (1) { delay(10); }
+  }
+  // To use a slightly lower 32V, 1A range (higher precision on amps):
+  //ina219.setCalibration_32V_1A();
+  // Or to use a lower 16V, 400mA range (higher precision on volts and amps):
+  //ina219.setCalibration_16V_400mA();
+
+  Serial.println("Measuring voltage and current with INA219 ...");
+
+}
+
+uint8_t portArray[] = {16, 5, 4, 0, 2, 14, 12, 13};
+String portMap[] = {"D0", "D1", "D2", "D3", "D4", "D5", "D6", "D7"}; //for Wemos
+//String portMap[] = {"GPIO16", "GPIO5", "GPIO4", "GPIO0", "GPIO2", "GPIO14", "GPIO12", "GPIO13"};
+
+
+void check_if_exist_I2C() {
+  byte error, address;
+  int nDevices;
+  nDevices = 0;
+  for (address = 1; address < 127; address++ )  {
+    // The i2c_scanner uses the return value of
+    // the Write.endTransmisstion to see if
+    // a device did acknowledge to the address.
+    Wire.beginTransmission(address);
+    error = Wire.endTransmission();
+
+    if (error == 0){
+      Serial.print("I2C device found at address 0x");
+      if (address < 16)
+        Serial.print("0");
+      Serial.print(address, HEX);
+      Serial.println("  !");
+
+      nDevices++;
+    } else if (error == 4) {
+      Serial.print("Unknow error at address 0x");
+      if (address < 16)
+        Serial.print("0");
+      Serial.println(address, HEX);
+    }
+  } //for loop
+  if (nDevices == 0)
+    Serial.println("No I2C devices found");
+  else
+    Serial.println("**********************************\n");
+  //delay(1000);           // wait 1 seconds for next scan, did not find it necessary
+}
+
+void scanPorts() { 
+  for (uint8_t i = 0; i < sizeof(portArray); i++) {
+    for (uint8_t j = 0; j < sizeof(portArray); j++) {
+      if (i != j){
+        Serial.print("Scanning (SDA : SCL) - " + portMap[i] + " : " + portMap[j] + " - ");
+        Wire.begin(portArray[i], portArray[j]);
+        check_if_exist_I2C();
+      }
+    }
+  }
+}
+
+void loop() {
+
+  float shuntvoltage = 0;
+  float busvoltage = 0;
+  float current_mA = 0;
+  float loadvoltage = 0;
+  float power_mW = 0;
+
+  shuntvoltage = ina219.getShuntVoltage_mV();
+  busvoltage = ina219.getBusVoltage_V();
+  current_mA = ina219.getCurrent_mA();
+  power_mW = ina219.getPower_mW();
+  loadvoltage = busvoltage + (shuntvoltage / 1000);
+  
+  Serial.print("Bus Voltage:   "); Serial.print(busvoltage); Serial.println(" V");
+  Serial.print("Shunt Voltage: "); Serial.print(shuntvoltage); Serial.println(" mV");
+  Serial.print("Load Voltage:  "); Serial.print(loadvoltage); Serial.println(" V");
+  Serial.print("Current:       "); Serial.print(current_mA); Serial.println(" mA");
+  Serial.print("Power:         "); Serial.print(power_mW); Serial.println(" mW");
+  Serial.println("");
+
+  delay(2000);
+
+//    scanPorts();
+//    delay(5000);
+}
+

test/README

@@ -0,0 +1,11 @@
+
+This directory is intended for PlatformIO Test Runner and project tests.
+
+Unit Testing is a software testing method by which individual units of
+source code, sets of one or more MCU program modules together with associated
+control data, usage procedures, and operating procedures, are tested to
+determine whether they are fit for use. Unit testing finds problems early
+in the development cycle.
+
+More information about PlatformIO Unit Testing:
+- https://docs.platformio.org/en/latest/advanced/unit-testing/index.html